XilinhotStage main lifting platformWhat problems should be paid attention to during operation
release time:2024-07-11 15:32:57

If the elevator is already on the first floor, its safety cannot be guaranteed. If the elevator needs to be refueled without refueling, it will cause wear and tear on the mechanical components of the elevator, greatly shortening its service life and preventing normal use of the elevator.Xilinhot,When accidentally trapped in an elevator, one should remain calm, press the alarm bell inside the elevator, and call the elevator emergency rescue phone or community property phone for help. Do not open doors or mess with buttons, and patiently wait for rescue.Maintenance of elevator hall doors and car doors. Elevator malfunctions usually occur on the elevator hall and car doors, so attention should be paid to the maintenance of the hall and car doors. One is to refuel the fuel on the upper sill of the door and keep it in good condition, so that the elevator will not make unpleasant noises during operation and the opening of the door. Pay attention to the inspection of the safety contact plate or light curtain type contact plate switch wire of the elevator, as the frequency of opening and closing the door in the elevator is high, which can cause damage to the switch wire. This requires maintenance personnel to inspect it every time they work, and replace it in advance to avoid users having doubts about the quality of the elevator product due to door issues.CarthageThere are dedicated operation buttons for firefighters at appropriate positions at the entrance of the first floor elevator. The operation buttons are generally protected by glass sheets and have a red&# quo; mark in place; Dedicated to fire protection; Words such as.Measure the beam edge distance between the upper and lower support beams. The measurement is to suspend the line from the upper support point to the ground for positioning, and then measure the horizontal distance from the positioning point to the edge of the lower support beam.If the elevator is already on the first floor, immediately open the elevator door and enter the firefighter's dedicated state.


XilinhotStage main lifting platformWhat problems should be paid attention to during operation



Measure the length, width, and depth of the pit (if any) and observe whether there are grooves and embedded parts at the support beam.Passengers wearing long skirts and strapping sandals when riding on the escalator should try to stand slightly in the middle of the escalator to prevent shoes and clothing from being drawn into the escalator and causing danger, and to prevent skirts or pants from getting stuck.The requirement for the shaft is that it should not be plastered, which is beneficial for reducing noise, but there should be no protruding foreign objects.device management,Attention: The elevator consists of two main parts: mechanical and electrical. If the elevator is not maintained on a daily basis, its safety cannot be guaranteed. If the elevator needs to be refueled without refueling,XilinhotNew type of small elevator for household villas, it will cause wear and tear on the mechanical components of the elevator, greatly shortening its service life and preventing normal use of the elevator.During the use of elevators, some elevator users seek temporary workers or unqualified companies for elevator maintenance in order to reduce costs and save funds. Once safety issues arise, on the one hand, the maintenance technology and quality are guaranteed, and on the other hand, if any problems occur, someone is also responsible.The beam edge distance is too small: The method of shortening the lower platform is to shorten the total length of the escalator, but note that the range of shortening is very limited, generally not exceeding mm. Generally,XilinhotHousehold indoor elevator small, the platform cannot be shortened because it contains equipment such as cabinets and motors. Change the angle of the escalator from degrees to degrees


XilinhotStage main lifting platformWhat problems should be paid attention to during operation



Measurement of elevator and escalator shafts (III)High quality and low price,Measurement of elevator and escalator shafts (III)The elevator stops on a certain floor for a long time without moving or responding to external calls: it is possible that the elevator administrator has activated the driver operation function.Measure the beam edge distance between the upper and lower support beams. The measurement is to suspend the line from the upper support point to the ground for positioning,The speed limiter tensioning device and the steel belt tensioning device should be equipped with a safety switch.Measurement of elevator and escalator shafts (III)During the use of elevators, some elevator users seek temporary workers or unqualified companies for elevator maintenance in order to reduce costs and save funds. Once safety issues arise,XilinhotVertical obstacle free lifting platform, even the responsible unit cannot be found. If the maintenance is carried out by elevator manufacturers or qualified professional companies, on the one hand, the maintenance technology and quality are guaranteed, and on the other hand, if any problems occur, someone is also responsible.


comment list
  • Security system design consulting services

    XilinhotStage main lifting platform The quality at this price is excellent value for money

  • Shunjie Earthwork Engineering Company

    Let me talk about the quality of the goods first: XilinhotStage main lifting platform Overall it is good, and the packaging is tight. Let’s talk about business services: Like it. Last review express:

  • biomass heating

    Really a good seller. I have to find you if I have this XilinhotStage main lifting platform demand in the future!

  • Qianyou Information Technology Co., Ltd.

    I heard a colleague's introduction to buy XilinhotStage main lifting platform, and they all said that the quality is good, and I will come to your house next time. Ha ha.

©2009-2024Industrial Microblog  Sitemap