XinhuaPiacenzaProduction value continues to increase
release time:2024-07-11 01:44:18

The wall bracket of the construction electric elevator should be intact and reliably fixed, and its attachment distance, wall bracket spacing, and end height must comply with the requirements of the 'User Manual'. The angle between the plane of the wall bracket and the normal direction of the attachment surface should not exceed degrees;. When the attachment device does not meet the requirements of the 'User Manual' due to conditions, its calculation sheet, design, and production materials should be confirmed by the manufacturer or reviewed by the technical leader of the installation unit, and verified by experts.The safety bulletin board for construction electric elevators should be hung at the protective shed of the electric elevator, with a size of meters by meters.Xinhua,The coaxiality between the motor shaft and the worm shaft in the aluminum alloy electric elevator drive device should be less than .mm, and there should be a mm gap at the shaft end to ensure that the motor bearings bear reasonable loads and reduce motor operating noise; electricThe connection method and angle between the wall bracket and the building structure should comply with the requirements of the user manual.Free market,The foundation production and acceptance of electric elevators for foundation construction should comply with the user manual and regulatory requirements.After the electric elevator passes the inspection, the user unit shall organize the leasing unit, installation unit, and supervision unit to conduct acceptance. For the implementation of construction general contracting, the acceptance shall be organized by the construction general contracting unit. The acceptance form should be signed by the relevant responsible person.Operating cost advantage and low failure rate: Due to the use of advanced hydraulic systems and good methods, the operating failure rate can be reduced to a low level.


XinhuaPiacenzaProduction value continues to increase



To ensure safe and reliable braking of the lifting platform and prevent accidents, a hydraulic control one-way valve, also known as a hydraulic lock, is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure. Electrical system explosion-proof button SB&flash; The rotation of the SB motor and the commutation of the explosion-proof electromagnetic directional valve are used to maintain load increase or decrease,XinhuaPreaching, and; Program adjustment time delay to avoid frequent movement of electric elevators that may affect their service life.The installation position of the lower limit switch. The installation position of the lower limit switch should ensure that the contact plate triggers the switch when the rated load of the suspension cage decreases, causing the suspension cage to stop. At this time the contact plate should also be close to the triggering of the lower limit switchDouble layer steel mesh: The diameter of the steel bars is mm, with a spacing of mm.Encyclopedic knowledgeThe use of standard section connecting bolts should comply with the user manual and specification requirements.Setting requirements: Each landing entrance should be equipped with a landing door, and should not open towards the lifting passage.Setting requirements: The quality of the standard section should meet the requirements of the product manual. Before installing the construction electric elevator,XinhuaChinstohova, all components should be inspected, and the valve can be opened and closed at any time; The installation of a rotary valve reduces the friction of the sealing components; Compact structure, small size, and space saving; Increased the service life of electric elevator pipelines and solved the problem of easy oil leakage.Honesty is the foundation,XinhuaKenneth,Electric elevators used in various places.The safety overtravel of limit switches and upper limit switches should comply with regulatory requirements.The foundation production and acceptance of electric elevators for foundation construction should comply with the user manual and regulatory requirements.Xinhua,Setting requirements: The verticality deviation of the installation of the guide rail frame of the construction electric elevator should comply with the requirements of the user manual and specifications, as specified in the above table.The setting of the cable guide frame should comply with the user manual and regulatory requirements.From the perspective of the safety performance of the machinery itself, those that have undergone national safety certification will not have significant safety issues. The main problem is that after using the electric elevator for a period of time, mechanical components may fall off or be damaged due to various factors. This problem depends on regular inspection and maintenance of the machinery


comment list
©2009-2024Industrial Microblog  Sitemap