JiangsuBohong TribeThe cause of the failure and its analysis and troubleshooting
release time:2024-07-10 23:45:06

The function of the lifting platform in a theater is roughly as follows: the main lifting platform arranged in the main performance area of the stage is mainly used to quickly change the scenery. Typically with&quo; Product; In the music and dance theater stage arranged in a zigzag pattern,JiangsuRubin, the lifting platform, side car platform, and rear car turntable perform a rapid transformation of the entire or partial scene. This arrangement allows for rapid switching of three full sets.The foundation base or embedded parts should be fully embedded in the concrete foundation plate.Jiangsu, the operating failure rate can be reduced to a low level.Leixlip,In addition to ground protective fences, low level doors can be used. Low level doors should meet the following requirements: the height of the door should be between m and m. And there should be at least protective railings,JiangsuToledo, a half height middle crossbar, and a toe board at least mm above the ground.The counterweight guide rail should meet the specification requirements.Setting requirements: The anti loosening and anti loosening parts between the connecting parts should comply with the provisions of the user manual and should not be replaced by other objects. For connecting bolts with pre tightening requirements, a torque wrench or special tool should be used to accurately tighten the bolts to the specified torque value according to the specified tightening sequence. When installing standard section connecting bolts it is advisable to place the screw at the bottom and the nut at the top.


JiangsuBohong TribeThe cause of the failure and its analysis and troubleshooting



Then, the lifting platform platform platform that carries the load needs to be balanced, and no deviation of one side is allowed. The lifting of goods does not allow people to stand on both sides of the platform, and the lifting of goods should try to maintain a stable and uniform speed.The movement of its related components is direct.Construction electric elevators outside the lightning protection rangeQuality Assurance,The landing door should be in a normally closed state. Without the permission of the construction electric elevator driver, the landing door shall not be opened.Setting requirements: The landing door should be standardized and tooled.The distance between the electric hoist and overhead line in Electrical safety construction shall meet the specification requirements, otherwise protective measures shall be taken.


JiangsuBohong TribeThe cause of the failure and its analysis and troubleshooting



The full height landing door should meet the following requirements: the net height of the landing door opening should not be less than m. In special circumstances, it is allowed to lower the height of the lower door opening, but in any case, the net height of the lower door opening is not less than m. (Article of GB-)Interpretation and observation,Vertical lead screw electric lifting mechanism: Adopting a lead screw transmission method, it can achieve the lifting of a double-layer tabletop. Multiple lifting platforms can be formed as needed, and different steps can be formed within the travel range to meet the needs of meetings and performances; Pavilion,JiangsuAlexandria, Terrace, Tower, Pavilion; Ideal props.The usual operation of landing and docking. The installation position of the upper limit switch should comply with the following: when the lifting speed is less than .m/s, the upper safety distance L left after the upper limit switch is triggered by the hanging cage should not be less thanA complete lifting platform accessory can be selected and customized according to different places, venues, demonstrate multifunctional, meet various different needs, and win market demand. In modern industrial transportation processes, lifting platforms have begun to play an increasingly important role whether in airports, docks, warehouses, floors, workshops and other places that require rapid loading and unloading of goods, they have played a very practical value, It has also brought great contributions to the entire industry and even the entire economic development. However, long-term operation and use of these devices inevitably lead to wear and consumption, and regular maintenance and upkeep are essential. Otherwise, both work efficiency and utilization rate will decrease, and at that time, the gains and losses will outweigh the losses.Jiangsu,Use floor doors and cage door devices on construction sites where conditions permit.Setting requirements: When the distance between the outer edge of the construction electric elevator and the external overhead power line cannot meet the requirements of a small safety distance, the protective measures taken should comply with the specification requirements.Protective measures should comply with regulatory requirements.


comment list
©2009-2024Industrial Microblog  Sitemap