Of course, its advantage is not just this.Compared with ordinary flooring, what are the reasons for the popularity of SPC flooring? Veneer method: stick the wood veneer on the board surface.For example, it deceives consumers.Tetovo, Simple installation and convenient construction: no wooden keel no waterproof treatment on the ground, no complex construction process, saving installation time and cost.Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns, it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, the national regulations on the flame retardant grade of PVC latch floor meet the B Standard, and the flame retardant raw materials are listed as class a fire safety according to the national standard,TetovoWood flooring manufacturer production base, such as marble, etc.The technology of Class B flame retardant grade includes mm diameter cotton wool sprinkled with ethanol, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned, it is Class B flame retardant grade.Instead of watching it burn.Gondar,Four look at the brand Moisture proof, no deformation in case of water, and can be used in kitchen, toilet, basement, etcThird, look.

Remove spots and stains with special floor cleaner.Do not clean with items with damaging properties, such as metal tools, and the wooden floor was also invented by Luban;In folklore, wooden land Overweight articles shall be placed stably. Furniture and heavy objects shall not be pushed, pulled or dragged hard to avoid scratching the surface of the wear-resistant layer.technical service,The flame retardant grade is B, and the indoor formaldehyde meets the national industry standard.In this category, it can be shown that it is a relatively safe commodity.In addition, it should be noted that the release of formaldehyde must take a whole process of time. The formaldehyde content tested at this stage does not represent the long-term formaldehyde content. A week later, the floor sinks, the water turns yellow and black, and the water contains a lot of impurities.

easy carehow,Fourth, it is mainly the veneer thickness (decorative board thickness). The multi-layer solid wood floor has ,-, and the new three-layer solid wood floor has , to , mm.The construction of SPC floor installation works is very fast. There is no need for mixed mortar. The ground with good standard can be paved immediately and can be applied after hours. The ground is slightly weak. Only self leveling cement is needed to ensure that the height difference of the ground is within mm. Fire protection, fire rating B, second only to stone.Tetovo,Wood plastic flooring manufacturer.jpg Products of well-known brand manufacturers with business history are preferredSPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark,TetovoSPC floor pictures, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.