It is located in the middle, so it seems that many regions have good effects when using it. Under the action of auxiliary devices, it can transport the slurry, and because the sealing device itself is special, it can also ensure the internal and external balance of the submersible slurry pump during transportation, so that the pressure at both ends of the equipment can be balanced during normal usePadova, Tighten the terminal blocks. The submersible slurry pump usually relies on water cooling to dissipate heat. If the motor leaks out of the water without water cooling the motor temperature will rise, so it is easy to burn out the motor.Showot, Head refers to the energy obtained from the pump by the unit weight of liquid output by the pump, so head refers to the effective energy obtained from the liquid output by the pump in unit time - that is, the effective power of the pump: the equation is PE= ρ GQH (W)= γ QH (W) Slurry pump Inappropriate model is selected when selecting the pump. In actual use, when the load conditions do not match the model of the slurry pump, for example, the pump lift used is too high or too low, which will lead to overload, so we are selecting the pump In addition to the main impeller inside the equipment, a set of impeller for mixing will be added at the bottom of the equipment, so that some mortar slowly settled inside the equipment can be mixed with water to become a flowing medium,PadovaZD slurry pump,PadovaWQ submersible sewage pump, so that the equipment can be used without its
When the slurry pump is working, the pump needs to be placed on land, the suction pipe in water, and the pump needs to be started. Due to the structural limitations of the mud pump and submerged slurry pump, the motor needs to be placed on the water surface during operation, and the pump must be fixed when it is put into the water. Otherwise, the motor will fall into the water Structural features of horizontal slurry pump: The ah HH and L-type slurry pumps at the pump head are of double pump shell structure, the pump body and cover are equipped with replaceable wear-resistant metal lining, and the flow passage components such as impeller, the pump head shall be determined by enlarging the margin of % - %.Honesty is the foundation, First of all, we need to choose equipment with formal certificates when making choices. We must avoid buying some obsolete or inferior products. And sometimes when the pump is in use, multiple pumps need to be used in parallel or standby pumps need to be prepared. Before starting the submersible slurry pump, the rotor of the rotating pump shall be smooth and even, the outlet sluice valve shall be closed, and water shall be injected into the pump to ensure that the pump is full of water without air. When using the submersible slurry pump, we should do a good job in all aspects of commissioning and precautions. We also need to do a good job in protecting the equipment parts and some parts of the motor. Only in this way can we avoid the impact of water and other impurities entering the motor
The standby submersible slurry pump shall roll the shaft / turn every week to make the bearing uniformly accept the static load and external oscillation. The building structure in the water pump room shall be reconstructed. Sound absorbing and isolating plates shall be installed around the wall and on the top of the machine room and fixed with light steel keel; The connecting holes between the machine room and other rooms are tightly blocked,PadovaVertical centrifugal slurry pump,Highly recommended, The use of water pumps is related to all aspects of our life. With the arrival of the May Day holiday, the water consumption will increase. Therefore, it is necessary for us to choose a suitable water pump. Wheel wear is too serious; The water absorption can not reach or exceed the specified height: it may not be the problem of the pump itself, but the local water volume is too small. confirm whether the pressure capacity of the pipeline meets the requirements, and conduct hydrostatic test if necessary.Padova, If there are sundries blocked, the pump will not be filled with water. When this happens again technicians need to properly adjust the liquid level in the pump sump to a proper height, it needs to be replaced in time, The above is the reason for the insufficient liquid supply of the water pump when it is in use, as well as the specific methods to deal with this situation. We should pay attention to the regular inspection of the equipment during normal use to ensure that it is in use It is not correct that it has no effect on us.