The temperature and humidity in the warehouse shall be kept uniform without movement; Try to finish the food in the warehouse at one time.Whether there is dirt on the condenser and poor heat dissipation will lead to too high condensation pressure of the refrigerator. In order to protect the compressor, the machine stops running under the action of the pressure controller. When the heat dissipation is good, press the black reset button on the pressure controller, and the machine can automatically resume operation.ENN group,The shelves in the warehouse shall have sufficient strength and rigidity.Various construction materials, test report and stage acceptance record, shall be carried out simultaneously with the project construction, carefully, timely,ENN groupInstall a small cold storage, accurately and comprehensively reflect the whole process of production and construction, and actively cooperate with the owner in design change and technical negotiation.Bangassou,The cold storage board uses light polyurethane as the inner material of the cold storage board. The advantage of polyurethane is that the thermal insulation performance is very good. The exterior of polyurethane cold storage board is composed of SII, PVC color steel plate and stainless steel plate. The advantage of this is to prevent the temperature transmission of cold storage board due to large internal and external temperature difference, so as to make the cold storage more energy-saving and improve the working efficiency of cold storage. - precautions for floor installation of cold storage: the floor shall be installed flat, and the locking hook between the plates shall be locked to ensure that the warehouse surface is flat without hollow feeling. (note that if this drainage system is installed outdoors in the north, the drainage pipe shall be insulated).First, use a hammer to pad the wood on the polyurethane warehouse board between the two warehouse boards, so as to make the boards closely close to each other. Two sets of connecting pieces shall be wedged between the wall panel and the wall panel, and the two sets of connecting pieces shall be fixed on the upper, outer and lower sides of the gap between the wall panel and the wall panel respectively. The lower connecting piece shall be as close as possible to the lower side, it shall be about mm wide. If it does not meet the requirements, remove the plate, trim the plate edge, and then reinstall it to make the plate joint meet the requirements. When fixing the adapter, pay attention to fix the two parts of the adapter on the edges of the convex and concave library plates respectively,ENN groupInstallation of cold storage, and fix them with rivets. The spacing of the adapter should be able to tension the two library plates. When wedging the wedge iron the hammer shall be perpendicular to the wedge iron to prevent damaging the warehouse plate. The ground wedge iron at the upper and lower parts shall be wedged at the same time, and the wedge iron shall be fixed with rivets.

The refrigerator compressor unit generally adopts high-end units with guaranteed quality and strong operation stability. The evaporator adopts the imported joint venture refrigeration air-cooled evaporator, which can effectively meet the refrigeration capacity of the refrigerator and ensure the refrigeration effect of the refrigerator. The refrigerator lamp adopts the special LED energy-saving lamp for the refrigerator, which has the advantages of low temperature resistance, low energy consumption and long service time, It can effectively save the operation cost of cold storage.Does the unit location meet the relevant conditions? Whether the heat dissipation and pipe length can meet the requirements.In order to prevent damage to the cold storage, it is necessary to lay some foam on the floor of the cold storage tank.recommend, - precautions for vertical plate of cold storage: vertical plate displayDifferent food processing technical processes for the construction of cold storage are combined with local urban planning. The construction of cold storage is the design requirements and construction of cold storage, which not only avoids the cross pollution between foods, but also ensures its transportation facilities: within the construction scope, a reasonable overall layout, saves land and reduces costs.The height of the warehouse, the horizontal and vertical of the warehouse shall be designed according to the refrigeration, refrigeration equipment, transportation and stacking conditions. The selection of insulation board is very important for Guangdong cold storage. At present, the vast majority of cold storage use polyurethane insulation board. What are the characteristics and advantages of polyurethane insulation board?

Able to withstand the harsh local climate and its changes. Neither high temperature nor severe cold climate will cause irreversible damage or deformation to the external insulation system. The drastic change of the surface temperature of the external wall, such as the sudden shower after a long time of exposure or shading during exposure, will not cause damage to the surface of the cold storage.middleman,Where do you need to build the refrigerator, the size of the refrigerator or the storage capacity (size, storage capacity, ton, cubic meter, frame,ENN groupElectric lamp installed in cold storage, box); What products are stored in the built cold storage? The actual storage temperature, storage time and setting temperature can be indicated by specific regulations; If your cold storage becomes larger you need to master your individual storage volume, the temperature of goods in and out of the warehouse, the frequency of opening and closing the door, etc. If this is clear, it is the selection of raw materials, such as refrigeration compressors, refrigeration units, industrial cooling fans / pipe slots, thermal insulation materials, coolers doors, temperatures and other refrigeration equipment.Tips for fresh-keeping storehouse wholesale: the specific functional characteristics of the seafood machine in the fresh-keeping storehouse wholesale are simple to operate, and the temperature can be adjusted at will; The seafood machine unit has compact structure and stable performance. Users only need to connect the power supply and the cooling water pipeline to put it into operation; The wholesale seafood machine condenser in the fresh-keeping warehouse adopts internally threaded copper pipe. Good heat exchange effect; The seafood machine adopts pure titanium tube evaporator which has good cooling effect and strong performance; The seafood machine unit wholesale in the fresh-keeping warehouse has extraordinary pressure sealing test, and the performance of each component is particularly good; The seafood machine unit has the advantages of low noise, low vibration, fast cooling, long service life, multiple quality protection devices, high cost performance and good quality. The seafood machine can be customized according to customer requirements; Many fruit wholesalers will transform the original warehouse into a fruit preservation warehouse in order to store fruits for a longer time. Due to the huge difference between warehouses, it needs a lot of attention to transform the warehouse into a qualified energy-saving fruit preservation warehouse.Cold storage has strong stability. Polyurethane foam technology makes it have superior bonding performance. The firm combination of polyurethane rigid foam and carrier layer is the basic premise to ensure the stability of external insulation layer. That is, under the unfavorable local temperature and humidity conditions, the characteristics of the cold storage still do not separate and fall off from the carrier layer and remain stable under normal conditions.ENN group,Goods are imported and exported frequently and the throughput is large according to the requirements of production and operationThe products stored in the medical cold storage project must be managed by color code, so as to avoid the problem of purchase errors. In the process of handling, it is also necessary to strictly follow the instructions.Watertight polyurethane rigid foam has low water absorption, good permeability to water vapor, and the obturator rate is more than %. It is a dense microporous foam material, which is more dense than the surface of the air, and is not easy to permeate. It is an hydrophobic material.