Nai on SeineChain lifting cargo elevatorWholesaler
release time:2024-07-10 20:25:02

Frequently check whether the various mechanisms are operating normally and whether there is any noise. If a fault is found, it must be eliminated in time.Safety performance: The lifting structure is made of high-strength manganese steel rectangular tube,Nai on SeineSimple cargo elevator lifting cargo elevator, and the scissor-type mechanical mechanism is easy to maintain, with strong stability and high carrying capacity. The maximum lifting height is about meters, and the maximum load is about tons. .Nai on Seine,The double-column aluminum alloy lifting platform has a beautiful and elegant design. It is made of high-strength aluminum alloy and has a large load capacity. The height is generally - meters, and the load is kg- kg. Large countertop design,Nai on SeineFixed guide rail lifting cargo elevator, suitable for one or two peopleOne or two people can work at the same time.Unscrew the screw on the dust-proof hole outside the flange of the elevator, adjust the PCS system ring to align the side hole with the dust-proof hole, and tighten the inner hexagon. After that, remove the motor shaft key.Rach Gia,In addition to the fixed mode, the elevator also has a vehicle-mounted mobile type. As the name implies, it combines the lifting equipment with the vehicle-mounted system. Such a lifting equipment is very flexible to move, and of course it is more useful. For example There is this kind of lifting equipment in the airport, and it is also possible to install this kind of equipment in stations or stadiums. Since it can be moved, the scope of operation is not limited to a certain place, and it can be used wherever lifting operations are required. It can be used. For example, the height of some advertisements is relatively high. At this time, mobile lifting equipment can be used to send billboards or staff to the designated height to work. This kind of equipment can also be divided into two types according to the driving mode: hydraulic lifting and electric lifting. The so-called hydraulic lifting is driven by hydraulic oil to reach a specified height. The electric mode is driven by a motor or geared to lift to A certain height, but at present, hydraulic lifting platforms are more widely used.Conscientiously write the special construction plan for installation and construction, and make safety technical disclosures to the installers.Uses: The scissor-type fixed lifting platform is mostly used for the transportation of goods between the height differences of the production line, the adjustment of the working height during the assembly of the workpiece, the feeding of the installed machine at a high place, the lifting of parts during the assembly of large equipment, and the storage and unloading place and Forklifts and other handling vehicles are used for fast loading and unloading of goods, car lifting, fixed three-dimensional parking and other places.


Nai on SeineChain lifting cargo elevatorWholesaler



The parts such as reduction box,Nai on SeineCustomized cargo elevator, gearbox, external gear and hydraulic oil are all in accordance with the requirements in the table.In the daily maintenance of the elevator, if the motor is overheated stop immediately and continue to run after removing the fault. The motor bearing should be lubricated with good quality.The use of the hydraulic lifting platform The user can choose the power mode and configuration according to his own scope of use: the power system includes: DC power supply, single-phase or three-phase power supply, and diesel engine.Quality improvementAnti-corrosion measures for the body of aerial work vehicles Pay attention to small scratches. The paint surface of aerial work vehicles is often corroded. In addition to common collisions, scratches, small rocks on the driving tires, there may also be a peeling paint spot and a small rust will appear after a long time. Because most of these scars are small, they are easy to ignore. Therefore, check regularly, the engine compartment cover and its surroundings, and once found, go to a professional beauty shop for processing.The price is guaranteed, the service is guaranteed, and it is a large-scale logistics and storage equipment service company directly operated by the manufacturer. Since the fixed lift is a mechanical device, so as to avoid some safety hazards in use.Always check the connections of the various parts of the hydraulic lift, and tighten them if they are loose. The tightness of the connecting bolts of the body should be checked when the body is under pressure.


Nai on SeineChain lifting cargo elevatorWholesaler



If the motor of the hydraulic lift is overheated, stop the machine in time and continue running after troubleshooting. The motor bearings must be in good condition.Quality risk,Prepare the foundation according to the foundation plan, leveling, and alignment to ensure the level of the foundation and various requirements for use.Avoid, especially during storage. Store in a cool, dry place and avoid rain and snow during work.Pay attention to check whether there are any broken wires and loose strands in the wire ropes of each part. If it exceeds the relevant regulations, it must be replaced immediately. The maintenance of the wire rope should be strictly in accordance with regulations.Nai on Seine,Mechanisms: Mechanisms such as tabletops, track grooves, wire ropes, chains, and pulleys are made of solid materials to ensure safety.When the freight elevator breaks down, professionals should be invited to repair it, and the freight elevator cannot be altered without authorization.Frequently check whether the various mechanisms are operating normally and whether there is any noise. If a fault is found, it must be eliminated in time.


comment list
©2009-2024Industrial Microblog  Sitemap