ShinriroUsed pipeline pumpWorking principle and application method of
release time:2024-07-11 10:43:51

  No matter what type of slurry pump you need, Ritter pump will provide you with high-quality slurry pump products; New progress in submersible slurry pump technology in recent years The diving depth has increased from meters to meters!  The high-efficiency slurry pump has three characteristics: first, the slurry pump has high operation efficiency and low loss.Shinriro,   Mechanical seal: mechanical seal is generally used when the sealing requirements are relatively high,ShinriroLong shaft submerged slurry pump, especially in the chemical industry. It is not only required that the slurry should not leak, but also not allowed to enter the pump body. The disadvantage of mechanical seal is high cost and difficult maintenance.  Now you know the reason why the pump has air turbidity. In fact, this is a very common phenomenon. You don&#;t have to worry about it. Water pump can transport many things, such as water, oil, liquid metal, acid-base night and so on. It is a good means of transport.Saint-Suzanne, the motor can add a variety of protection devices such as water inflow detection and overheating so that the product can operate safely for a long time under adverse working conditions.   Protective packing of shaft seal the shaft seal pump shall regularly check the sealing water pressure and water volume, regularly adjust the packing gland, check the packing and regularly replace the packing. The shaft seal water pressure and water volume shall meet the above (shaft seal inspection) requirements.  Some of them are OK. For irrigation and other purposes, in fact,ShinriroWQ submersible pump parameters, we choose to use larger flow. Let&#;s take a look at the method of selecting pumps.


ShinriroUsed pipeline pumpWorking principle and application method of



   There may also be mechanical failure of the pump, such as serious damage to the bearing of the pump, so that the bore will be 'swept' when the stator and rotor rub against each other, or the impeller will be stuck due to impurities such as water and grass when the pump pumps water  At this time, it is necessary to use the fire control cabinet. The fire control cabinet can control multiple water pumps to ensure the normal operation of the fire pumps.  The pump can often be selected according to the specific requirements of lift, flow and liquid delivery. The flow range of the delivered liquid is - L / s, the pressure range is .- MPa, and the diesel engine speed range is - rpm. Features: water pump, high automation and performanceManagement Department,   First, screw down the bolts on the side bearing pressure cap, and then remove the nuts used for the connection between the three parts: discharge section, stuffing box body and bearing body; Then screw off the round nut on the shaft, and successively install the bearing inner race bearing gland and retaining sleeve   The fixing method of the impeller is changed from screw thread to key clamp to prevent the impeller from falling off and causing damage!  Pressure. Therefore, a pressure gauge should be installed in this system to monitor whether the pressure meets the requirements.


ShinriroUsed pipeline pumpWorking principle and application method of



  It is occasionally found that there is insufficient liquid supply when using,ShinriroHH slurry pump, so what are the reasons for this situation and how to deal with it.retailer,  In fact, the pumps I am going to talk about here have a wide range of uses. Pumps are required for both civil and military purposes, as well as for advanced technologies, especially in the mining, chemical, metallurgical and other industrial sectors. It is a widely used general mechanical equipment. Most pumps are corroded or severely corroded  During normal operation, the impeller of the slurry pump becomes tighter and tighter as it turns. The more it is used, if the slurry pump reverses, it will directly cause the impeller of the slurry pump to fall off. The slurry pump must be disassembled and then re inspected, installed and tested.  Strong strength and other advantages. It is widely used as a sealing device for various pumps. Place a water seal ring at the bottom of the packing box, and then place the filler.Shinriro,  Water pump After understanding the cause of insufficient liquid supply we can solve the problem: First, we need to check whether the liquid level of the circulating liquid storage tank needs to add media to it.  It needs to be replaced in case of damage, swelling and deformation, insufficient spring pressure, breakage, etc.  The slurry pump of underground pump can also work normally.

comment list
©2009-2024Industrial Microblog  Sitemap