YunnanElectric elevator 200kgThe function of platform customer service
release time:2024-07-10 17:58:07

Buffer. In order to increase the energy for the car to hit the top or sink to the bottom. Remove rubber or sponge from the buffer and cabin to increase their impact energy; Rope groove slipping and other accidents caused the car to suddenly fall resulting in a safety clamp. To prevent breakage of the lifting wire rope. A safety clamp that can simultaneously cut off the power supply and stop the car from falling should be removed from the car. A car without safety tongs is not allowed to ride or carry people. If it is a simple electric elevator, there should be a safety device (such as a safety stop pin) to prevent people from suddenly falling when loading and unloading goods in the car; Electric elevators with three or more floors (including three floors) for passengers or passengers.Vertical lead screw electric lifting mechanism: Adopting a lead screw transmission method, and different steps can be formed within the travel range to meet the needs of meetings and performances; Pavilion, Terrace, Tower, Pavilion; Ideal props.Yunnan,Limit switches should be triggered directly by the movement of the suspension cage or its related components.The use of standard section connecting bolts should comply with the user manual and specification requirements.Dietikon,The connection method and angle between the wall bracket and the building structure should comply with the requirements of the user manual.During normal operation, the horizontal distance between the closed cage door and the closed landing door should not exceed mm. Otherwise, measures should be taken to make it meet the requirements, or side protection devices at the entrance of the landing station that meet the requirements should be equipped. The distance between any opening between the side protection device and the hanging cage or landing door should not exceed mm.When a rigid mm square or circular flat surface is applied with a normal force of N to either side of the door, the safety distance can be .m.High altitude operations and maintenance in areas such as repair, logistics, electricity, transportation, petroleum, chemical, hotel, sports center, mining, and enterprise. The lifting system of the lifting platform is driven by hydraulic pressure, also known as hydraulic liftingEmergency manual valve: In case of power failure,YunnanElevator platform electric, it can cause the car to descend to the nearest floor position and open the doorWelcome to inquire,Setting requirements: For construction electric elevators with foundations installed on roof slabs, floors, or other lower suspended structures, the bearing capacity of the foundation support structure should be checked. Click here to download the construction technical information for free. Basic drainage facilities should be installed.Setting requirements: The quality of the standard section should meet the requirements of the product manual. Before installing the construction electric elevator, all components should be inspected, and standard sections and other components with severe wear and deformation should be replaced.The verticality of the guide rail frame should meet the requirements of the specifications.

YunnanElectric elevator 200kgThe function of platform customer service

The setting of the cable guide frame should comply with the user manual and regulatory much,From the above comparison, it can be seen that hydraulic electric lifting mechanisms have stable lifting, low noise long service life, large load bearing capacity, and are relatively simple, making them suitable for use in stage equipment.Lower limit switch: In normal working state,YunnanElectric elevator, before the suspension cage touches the buffer, the lower limit switch first acts.Double layer steel mesh: The diameter of the steel bars is mm,YunnanIndoor small electric elevator, with a spacing of mm.Yunnan,Monthly maintenance and inspection of hydraulic lifting platform rollers, intermediate shafts and bearings, oil cylinder pin shafts and bearings, boom hinge shafts and bearings for wear. Add some oil to each part to extend the service life of the lifting platform bearings. The quality and level of hydraulic oil. The lifting platform should be raised throughout the entire process, and at this position, the hydraulic ground should be - millimeters higher than the bottom of the box. If the hydraulic oil becomes dark, sticky, or has foreign objects such as gravel, it should be replaced in a timely manner ( # hydraulic oil). Annual maintenance and inspection of all hydraulic pipelines and joints of the lifting platform. The pipeline must not be damaged, and the joints must not be loose. All joints must be tightened. Remove and disassemble the lowering valve of the lifting platform, blow out the plunger with compressed air, then install it and reinstall it. Drain and discard the hydraulic oil, tighten the joint, remove the oil filter, clean it with compressed air, and then return it to the oil tank and connect the pipeline.The foundation base or embedded parts should be fully embedded in the concrete foundation plate.Emergency manual valve: In case of power failure it can cause the car to descend to the nearest floor position and open the door

comment list
©2009-2024Industrial Microblog  Sitemap