JiexiuVicenzaRemind you to start at the source to reduce mechanical accidents
release time:2024-07-11 12:32:51
the door should be able to withstand and have no deformation; - Deformation not exceeding mm; After the test,Aluminum alloy lifting platforms can be divided into single column aluminum alloy, cargo elevator, double column aluminum alloy, three column and four column aluminum alloy. Can be used in factories, automated warehouses, parking lots, municipal facilities, docks, buildings, and installationsVertical lead screw electric lifting mechanism: Adopting a lead screw transmission method, it can achieve the lifting of a double-layer tabletop. Multiple lifting platforms can be formed as needed, and different steps can be formed within the travel range to meet the needs of meetings and performances; Pavilion, Terrace Tower, Pavilion; Ideal props.Candelaria,The landing door should be in a normally closed state. Without the permission of the construction electric elevator driver, the landing door shall not be opened.The verticality of the guide rail frame should meet the requirements of the specifications.Setting requirements: The quality of the standard section should meet the requirements of the product manual. Before installing the construction electric elevator, all components should be inspected, and standard sections and other components with severe wear and deformation should be replaced.


JiexiuVicenzaRemind you to start at the source to reduce mechanical accidents



The safety distance between the outer edge of the upper part of the landing door and the moving parts of the electric elevator during normal operation should not be less than .m; If the rated speed is not greater than .m/s, the safety distance can be .m.Unloading platform and attached electric construction platform etc.When the door is closed, except for the gap between the lower part of the door that should not exceed mm, any through-hole and opening size related to the distance between any door and adjacent moving parts, as well as the gap around the door or the gap between parts, should comply with the provisions of Table of GB -.Quotation sheet,Setting requirements: The anti loosening and anti loosening parts between the connecting parts should comply with the provisions of the user manual and should not be replaced by other objects. For connecting bolts with pre tightening requirements, a torque wrench or special tool should be used to accurately tighten the bolts to the specified torque value according to the specified tightening sequence. When installing standard section connecting bolts, it is advisable to place the screw at the bottom and the nut at the top.It is understood that the scissor type lifting platform is a widely used specialized equipment for high-altitude operations. Its shear fork mechanical structure provides high stability for the lifting platform, wide working platform, and high load-bearing capacity, making the range of high-altitude operations larger and suitable for multiple people working simultaneously. The lifting power is divided into V, V or V power supplies, diesel engines using Italian and domestic hydraulic pump stations, and the table top is equipped with anti slip insulation buckle plates, which have anti slip, insulation, and safety features. Please rest assured to use.Work is essential, and the main protective accessories include safety belts, guardrails, protective covers, platforms and stairs, etc.


JiexiuVicenzaRemind you to start at the source to reduce mechanical accidents



The oil cylinder and sealing components are made of imported components to solve the problem of unstable oil pressure and oil leakage of components for customers.Marketing Department,When the distance between the outer edge of the construction electric elevator and the edge line of the external overhead power line cannot meet the requirements in the table above, effective protective measures should be taken.Setting requirements: Steel wire rope electric elevators and reusable steel wire ropes should be equipped with anti loosening rope devices, which should have compliant loosening rope switches and be able to interrupt any movement of the cage until it passes through theVertical lead screw electric lifting mechanism: Adopting a lead screw transmission method, it can achieve the lifting of a double-layer tabletop. Multiple lifting platforms can be formed as needed, and different steps can be formed within the travel range to meet the needs of meetings and performances; Pavilion, Terrace,JiexiuHanshan,JiexiuAlexandria, Tower,Monthly maintenance and inspection of hydraulic lifting platform rollers, intermediate shafts and bearings, oil cylinder pin shafts and bearings, boom hinge shafts and bearings for wear. Add some oil to each part to extend the service life of the lifting platform bearings. The quality and level of hydraulic oil. The lifting platform should be raised throughout the entire process, and at this position, the hydraulic ground should be - millimeters higher than the bottom of the box. If the hydraulic oil becomes dark, sticky,JiexiuLe Mans, or has foreign objects such as gravel, it should be replaced in a timely manner ( # hydraulic oil). Annual maintenance and inspection of all hydraulic pipelines and joints of the lifting platform. The pipeline must not be damaged, and the joints must not be loose. All joints must be tightened. Remove and disassemble the lowering valve of the lifting platform, blow out the plunger with compressed air, then install it and reinstall it. Drain and discard the hydraulic oil tighten the joint, remove the oil filter, clean it with compressed air, and then return it to the oil tank and connect the pipeline.During the use period, the user unit should organize professional technical personnel to inspect the construction electric elevator monthly according to the standard requirements, otherwise protective measures shall be taken.


comment list
  • printer

    Can you give me JiexiuVicenza detailed specification data?

  • Gas fire extinguishing system

    Although JiexiuVicenza has not yet arrived, I am looking forward to it, and the inquiry is still in transit.

  • power plant accessories

    The delivery speed is very fast, give your company a thumbs up

  • Consultant Construction Engineering Company

    JiexiuVicenzaHow is the quality? Do you have it in stock?

  • Baimiaozi Foundry Company

    JiexiuVicenza I received it, the seller delivered the goods very quickly, the logistics is also very good, the customer service attitude is excellent, very patient, giving people a kind of intimacy, a

  • yonda construction engineering co., ltd.

    Since searching and shopping online, you never have to go out and wander around. Your JiexiuVicenza quality is guaranteed, logistics and delivery are fast, big brands are better than offline stores, a

©2009-2024Industrial Microblog  Sitemap