Of course, and various index values such as indoor formaldehyde exceed solid wood flooring.The patent of the utility model is formed by cross lamination of boards of different greening plants,CasanakWaterproof board, which gets rid of the defects of wet expansion and contraction of solid wood floor to a certain extent, has small dry shrinkage and wet expansion rate, good specification reliability, preserves the pure natural wood texture of solid wood floor, and has comfortable feet and feet.Solid wood composite floor not only has the reliability of laminate floor and the beauty of solid wood floor, but also has the advantages of environmental protection. Keep the floor dry and clean. If there is dirt on the floor surface,First, slight scratches.If there are cracks inside the wooden floor, the internal cracks will lead to the depression of the wood floor, which has a great impact on the normal use.Songwa, Ecological environment protection the patent of the utility model has the advantages of being conducive to installation and maintenance, and prevents the defects of strengthening the composite floor, such as high formaldehyde content standard, astringent upper feet and so on.For laminate flooring, the main standard of floor environmental protection is formaldehyde emission.In terms of the limitation of formaldehyde emission standards, the environmental protection of the flooring industry has experienced three technological revolutions: E E and FCF.At an earlier stage, the formaldehyde emission standard of wood-based panel is E level (formaldehyde emission ≤ mg / g), and its formaldehyde emission limit is very loose. Even for products meeting this standard, the formaldehyde content may exceed more than three times that of E level wood-based panel, seriously endangering human health, so it must not be used for home decoration.Therefore,CasanakFlooring leather, there was the first environmental protection revolution. In this environmental protection revolution, the flooring industry implemented the E level environmental protection standard, that is, the formaldehyde emission is ≤ ? / L. although it basically does not pose a threat to the human body, which has reduced the formaldehyde emission of the floor to . ? / L.The best way to identify whether the floor is environmentally friendly is to pry the floor from the lock with a screwdriver and hammer, so that the floor substrate is exposed in a large area, but a bad one has a strong pungent smell! Establish the interior decoration style you want: if you expect simplicity and warmth, choose the sexual or shallow floor as much as possible, and if you expect calm air, choose the dark floor.

The construction of installation works is convenient.It is simple to clean, bright as new, dirt free and easy to clean. The surface of solid wood reinforced composite floor is painted and treated very well, with good wear resistance, and does not need to spend a lot of energy on maintenance. It is reported that good solid wood composite floor in the market can keep the paint bright as new without waxing within years. This is in sharp contrast to the shape and maintenance of wood floor.UV layer: the coating formed after UV oil is cured with curing agent, which can prevent the volatilization of chemicals in the plate by UV.[]Inspection items,Sixth his specifications and dimensions are also related to his total price. What does the real wood floor look like?The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.

Common cost methods for solid wood flooring are as follows:Quality improvement,CasanakPrice of waterproof board, Dirt elimination method: special decontamination oil can be used to wipe oil stains, paint and printing ink;If there are blood stains, fruit juice, red wine, wine and other dirt, you can wipe it with a wet towel or a towel dipped in an appropriate floor cleaning solution, and you can&#;t eliminate the wood floor with strong alkali caustic soda solution.Identify from the packaging. Check the ground humidity. SmellCasanak,Three look servicePrecautions for solid wood floor installation : do not use the fixing method of wooden wedge and nail. Scrape the board with a blade.