Naturally connect the motor to the lift. When connecting, it must be ensured that the concentricity of the output shaft of the elevator is consistent with that of the input shaft of the motor, and that the outer flanges of the two are parallel. If the concentricity is inconsistent, it will cause the motor shaft to break or the elevator gear to wear.Before the elevator manufacturer connects the motor to the elevator please make the keyway of the motor shaft perpendicular to the tightening bolt. In order to ensure uniform force, please screw on the mounting bolts at any diagonal position first, but do not tighten them tightly, then screw on the other two mounting bolts at diagonal positions, and then tighten the four mounting bolts one by one. Finally, tighten the tension bolts. All tightening bolts need a torque wrench to fix according to the marked fixed torque data and check whether the lift and lifting platform are used.How should we check the construction site of the construction hoist? you know?Los Angeles,Many times when ordering a large lifting platform, after the customer determines the parameters, the designer will first consider various factors before designing, including the size during transportation, to prevent it from being difficult to transport to the customer's installation site after being too wide, so When designing and manufacturing, it should be considered that separate assembly or split table can meet the requirements. At the same time, it is also necessary to consider the bearing capacity of the split, and design and manufacture on the premise of ensuring the load capacity and stability, so as to ensure that the equipment can be conveniently transported, hoisted and moved.The scissor-type fixed lifting platform is a kind of transportation and handling equipment for transporting goods from a certain height to another height. After the operation is completed, the platform is level with the ground, does not occupy the ground space,When the freight elevator breaks down, professionals should be invited to repair it, and the freight elevator cannot be altered without authorization.Features of hydraulic lifts: According to the working mode, hydraulic lifting platform products are divided into crank arm hydraulic lifting machines, scissor hydraulic lifting machines, mast type hydraulic lifts, and straight arm hydraulic lifting machines. The hydraulic lift is a replacement product of the folding arm lift (lifting platform) and the scissor lift (lifting platform). It can be widely used in stations, docks, airports, hotels, post and telecommunications, municipal gardens, cleaning companies, public building facade decoration, decoration or installation and maintenance of power systems, etc. The lift has the advantages of light weight, self-propelled, electric start, self-supporting legs, simple operation, large working area, especially the ability to cross obstacles for high-altitude operations and the like.Guide rail lift (also known as freight elevator) is a non-scissor hydraulic lifting platform, which is mainly used in industrial plants, restaurants, restaurants, warehouses, docks, workshops and other places that need to move goods vertically between high-rise buildings above the second floor. The low height is especially suitable for sites where the site is not suitable for digging pits. What problems do we need to pay attention to in these places where elevators are used?

The motor winding is short-circuited. When a short-circuit fault occurs in the motor winding, which increases the copper loss of the winding, causing the winding to overheat and even burn out.The most important point in the maintenance of the elevator is that no matter what abnormal phenomenon occurs in the elevator, it must stop working immediately. The elevator customer service personnel will explain the abnormal situation of the elevator, cooperate with the inspection of the elevator, and solve the abnormal situation as soon as possible before restarting the elevator. Work. In the case that the abnormal situation of the elevator has not been resolved, forced work is not allowed, and the problems caused by this cannot be underestimated.Always check the connections of the various parts of the hydraulic lift, and tighten them if they are loose. The tightness of the connecting bolts of the body should be checked when the body is under pressure.Sincere service,In the construction elevator, the switch box also has leakage protection equipment. Its wires and cables are well insulated, without leakage and the metal threaded is not rusted, and its damage is close to zero. His steel wire rope should comply with the corresponding configuration requirements, and there is no problem of broken strands and diameter reduction. Of course, the number of broken wires should not exceed the corresponding standard. His pulley movement is very flexible.Regarding the cleanliness of the hydraulic station, is there any relevant rule requirement?Conscientiously write the special construction plan for installation and construction and make safety technical disclosures to the installers.

Check the front page of the oil pipe to check whether the skin of the oil pipe of the hydraulic lifting platform is damaged or cracked, and if so, replace it immediately; secondly, check whether there is any sign of looseness at the connection between the oil pipe and the oil pipe, and if so,Los AngelesGuide rail type lifting cargo elevator,Los AngelesHydraulic guide rail type cargo elevator, tighten it immediately to avoid lifting on the hydraulic lifting platform There is an oil spill in the process, which leads to accidents; what items need to be checked before using the hydraulic lifting platform? Cut off the power first to avoid tragedies such as electric leakage and electric shock)Create brilliance,If the motor of the hydraulic lift is overheated,Los AngelesOutdoor cargo elevator, stop the machine in time and continue running after troubleshooting. The motor bearings must be in good condition.Good stability: The overflow valve can prevent the system pressure from being too high during upward movement. Emergency manual valve: In case of power failure, the car can be emergency lowered to the nearest floor to open the door. Manual pump: When the system fails, the manual pump can be operated to pump out high-pressure oil to raise the car to the nearest floor; Oil tank oil temperature protection: When the oil temperature in the oil tank exceeds the standard setting value, the oil temperature protection device will send out a signal, and start the elevator when the oil temperature drops.Are the water cooling and air cooling of the hydraulic station the same?Los Angeles,Avoid working in an environment. In the event of rain, snow and other weather, the use of the hydraulic lifting platform should be stopped to prevent the occurrence of a short circuit, resulting in electric leakage and electric shock; non-professionals are strictly prohibited from disassembling electrical appliances such as hydraulic lifting platforms. In the event of an accident, you can’t disassemble without permission to eliminate the cause. You must report to the manufacturer for repair in time, inform the phenomenon of the accident and the manufacturer will guide you to complete the inspection or send someone to repair it; do not disassemble the appliance without permission! Professional elevator factory guarantees quality, guarantees service. Guarantees quality. Your satisfaction is our pursuit! Welcome to inquire.Fixed lift is a kind of transportation equipment that directly lifts and unloads goods from the ground. It is mostly used in places such as goods transportation between height differences in production lines materials on and off the assembly line, and fixed three-dimensional parking. So what is the new price of the fixed lift?Goods should be stacked on the platform and not tilted. When the freight elevator goes up and down beyond the range of the platform, no one should stand around to watch.